E-3: Paper Jams In Tray 1; E-4: Paper Jams In Tray 2 - Fuji Xerox DocuCentre S2010 User Manual

Table of Contents

Advertisement

11 Problem Solving

E-3: Paper Jams in Tray 1

Follow the steps below to clear paper jams in Tray 1.
1
Remove the jammed paper by referring to "E-1: Paper Jam in Left Cover [A]" (P.180).
2
If the jammed paper cannot be removed, pull
out the tray.
Important • Pulling out a tray after a paper jam without
3
Remove the jammed paper.
If the tray is empty, load paper.
Note
4
Push the tray in gently until it stops.
11

E-4: Paper Jams in Tray 2

Follow the steps below to clear paper jams in Tray 2.
1
Remove the jammed paper by referring to "E-2: Paper Jam in One Tray Module Cover
[B]" (P.181).
2
If the jammed paper cannot be removed, pull
out the tray.
Important • Pulling out a tray after a paper jam without
182
checking where the jam is located may
cause the paper to tear and leave shreds
inside the machine. To prevent equipment
failure, check the location of paper jams on
the display before attempting to clear them.
• If the paper tears, check to make sure there
are no remaining shreds in the machine.
checking where the jam is located may
cause the paper to tear and leave shreds
inside the machine. To prevent equipment
failure, check the location of paper jams on
the display before attempting to clear them.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre s1810

Table of Contents