Edge-Core ECS3510-10PD Management Manual page 1162

| VLAN Commands
C 35
HAPTER
Configuring IP Subnet VLANs
show subnet-vlan
is found, the corresponding VLAN ID is assigned to the frame. If no
mapping is found, the PVID of the receiving port is assigned to the
frame.
The IP subnet cannot be a broadcast or multicast IP address.
◆
When MAC-based, IP subnet-based, and protocol-based VLANs are
◆
supported concurrently, priority is applied in this sequence, and then
port-based VLANs last.
E
XAMPLE
The following example assigns traffic for the subnet 192.168.12.192, mask
255.255.255.224, to VLAN 4.
Console(config)#subnet-vlan subnet 192.168.12.192 255.255.255.224 vlan 4
Console(config)#
This command displays IP Subnet VLAN assignments.
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Use this command to display subnet-to-VLAN mappings.
◆
◆ The last matched entry is used if more than one entry can be matched.
E
XAMPLE
The following example displays all configured IP subnet-based VLANs.
Console#show subnet-vlan
IP Address Mask
--------------- ---------------
192.168.12.0 255.255.255.128
192.168.12.128 255.255.255.192
192.168.12.192 255.255.255.224
192.168.12.224 255.255.255.240
192.168.12.240 255.255.255.248
192.168.12.248 255.255.255.252
192.168.12.252 255.255.255.254
192.168.12.254 255.255.255.255
192.168.12.255 255.255.255.255
Console#
– 1162 –
VLAN ID Priority
------- --------
1 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0