Panel Lock (Led); Print; Set-Up; Advanced Settings (Led)/Mode/Event - CareFusion AVEA Operating Instructions Manual

56
N.

Panel Lock (LED)

The LOCK key disables all front panel and screen controls except MANUAL BREATH, Suction,↑ %O
ALARM SILENCE, and LOCK.
O.

Print

The PRINT key outputs the contents of the currently displayed screen to a suitably connected parallel printer.
P.

Set-up

Opens the ventilator Setup screen.
Note:
Pressing the Set-Up button a second time before accepting Set-Up will close the window and restore the previous
settings. The Set-Up screen uses an on screen accept button. To change patient size without selecting new patient
requires that patient Set-Up be accepted after selecting patient size.
Q. Advanced Settings (LED)
Opens the Advanced Settings screen for data entry or adjustment. Toggles the screen on & off.
Note:
Pressing the Freeze button while the Advanced Setting window is open will automatically close the window and freeze
the graphics.
R. Mode
Opens the Mode Select screen for data entry or adjustment toggles the screen on or off. Pressing the Mode indicator at
the top of the touch screen will also access the screen.
Note:
Pressing the Mode button a second time before accepting the Mode will close the window and restore the previous
settings. The Mode screen uses an on screen accept button.
S. Event
Records an event for future reference. Some events are recorded automatically others can be logged manually to
display in this screen. See "Chapter 4: Monitors, Displays and Maneuvers" for a full list of events.
Chapter 3: Ventilator Operation Operator's manual
, ALARM RESET,
2
L2786 Rev. M