Powering Up The Avea - CareFusion AVEA Operating Instructions Manual

38

Powering up the AVEA

To power up the ventilator, connect the power cord to a suitable AC power supply and turn on the power switch located
on the back panel of the ventilator as shown here.
ON
Figure 2–43: Power Switch
The power up/reboot time for this instrument is approximately 7 seconds.
WARNING
A protective ground connection by way of the grounding conductor in the power cord is essential for safe
operation. If the protective ground is lost, all conductive parts, including knobs and controls, which may
appear to be insulated, can render an electric shock. To avoid electrical shock, plug the power cord into a
properly wired receptacle, use only the power cord supplied with the ventilator, and make sure the power
cord is in good condition.
WARNING
If the integrity of the external power earth conductor arrangement is in doubt, unplug the ventilator from the
mains AC and operate it from its internal battery or the optional external battery.
Chapter 2: Unpacking and Setup
OFF
Operator's manual
L2786 Rev. M