Supported Raid Cache Cards - IBM System x3750 M4 Type 8722 Installation And Service Manual

Supported RAID cache cards

The following table lists the supported RAID cache cards:
Table 17. Supported RAID cache cards and where you can install the cache cards.
RAID cache card
ServeRAID M5100 Series 512
MB Cache/RAID 5 Upgrade
for IBM System x (RAID cache
card)
ServeRAID M5100 Series 512
MB Flash/RAID 5 Upgrade for
IBM System x (RAID cache
card)
70
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
Where to install the
card Notes
You can install this
v To keep the SDRAM on this cache card in a self-refresh
cache card in the
optional SAS adapter
connector on the
v Provides RAID levels 5 and 50 upgrade support.
system board
v Enables the ServeRAID controller to run MegaRAID
or
the following
ServeRAID
v Has 40-bit memory.
controllers:
v ServeRAID M5110
SAS/SATA
Controller for IBM
System x
v ServeRAID M5120
SAS/SATA
Controller for IBM
System x
You can install this
v This cache card comes with a flash power module
cache card to the
optional SAS adapter
connector on the
system board
or
the following
ServeRAID
controllers:
v Provides RAID levels 5 and 50 upgrade support.
v ServeRAID M5110
v Enables the ServeRAID controller to run MegaRAID
SAS/SATA
Controller for IBM
v Has 72-bit memory.
System x
v ServeRAID M5120
SAS/SATA
Controller for IBM
System x
state, you can purchase and attach the optional
ServeRAID M5100 Series Battery Kit for System x.
firmware.
(Supercap pack) that you can attach to this card. It
powers the integrated RAID subsystem long enough to
store the cache contents to flash in the event of a power
loss. The flash power module must be installed remotely
in the server (see "Installing a RAID adapter battery or
flash power module" on page 87 for information about
where to install the flash power module in the server).
firmware.