IBM System x3750 M4 Type 8722 Installation And Service Manual page 481

806f010d-040affff • 806f010d-040cffff
806f010d-040affff The [NumericSensorElementName] has been disabled due to a detected fault.
Explanation: The drive 10 has been disabled (defunct) due to a fault detected by the controller.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
806f010d-040bffff The [NumericSensorElementName] has been disabled due to a detected fault.
Explanation: The drive 11 has been disabled (defunct) due to a fault detected by the controller.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
806f010d-040cffff The [NumericSensorElementName] has been disabled due to a detected fault.
Explanation: The drive 12 has been disabled (defunct) due to a fault detected by the controller.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
465
Appendix D. Integrated management module II (IMM2) error messages