Sas Raid Enablement And Cache Battery Pack For The 8248-L4T, 8408-E8D, Or 9109-Rmd - IBM Power Systems Series Manual

SAS RAID enablement and cache battery pack for the
8248-L4T, 8408-E8D, or 9109-RMD
You might need to configure redundant array of independent disks (RAID) on the serial-attached SCSI
(SAS) disk drives in your system enclosure. Use these instructions to install features to enable RAID on
™ ®
your IBM PowerLinux 7R4 (8248-L4T), the IBM Power 750 (8408-E8D), and the IBM Power 760
(9109-RMD) systems.
The following instructions will enable you to install SAS RAID enablement cards to prepare your system
to use SAS disk drives in a RAID configuration.
To find information on installing adapters or configuring RAID on your system see the following links:
v To view the PCI adapters, see PCI adapters
®
v To view the SAS RAID controllers for AIX operating system, see SAS RAID controllers for AIX
v To view the SAS RAID controllers for IBM i operating system, see SAS RAID controllers for IBM i and
the IBM i Information Center website (http://www.ibm.com/systems/i/infocenter).
v To view the SAS RAID controllers for Linux operating system, see SAS RAID controllers for Linux
1
© Copyright IBM Corp. 2013