IBM System x3750 M4 Type 8722 Installation And Service Manual page 467
Hide thumbs
Also See for System x3750 M4 Type 8722:
- Product manual (45 pages) ,
- Installation and service manual (882 pages)
Table of Contents
Advertisement
806f000f-220201xx
The System [ComputerSystemElementName] has detected no memory in the system.
Explanation: IMM has detected no memory in the system.
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0794
SNMP Trap ID: 41
Automatically notify Support: No
User response: Sys Boot Status :This is a UEFI detected event. The UEFI diagnostic code for this event can be found
in the logged IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the
Info Center for the appropriate user response.
806f000f-220202xx
Subsystem [MemoryElementName] has insufficient memory for operation.
Explanation: IMM has detected that the usable Memory is insufficient for operation.
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0132
SNMP Trap ID: 41
Automatically notify Support: No
User response: Sys Boot Status :This is a UEFI detected event. The UEFI diagnostic code for this event can be found
in the logged IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the
Info Center for the appropriate user response.
806f000f-220203xx
The System [ComputerSystemElementName] encountered firmware error - unrecoverable boot
device failure.
Explanation: IMM has detected that System Firmware Error Unrecoverable boot device failure has occurred.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0770
SNMP Trap ID: 5
Automatically notify Support: No
User response: Sys Boot Status :This is a UEFI detected event. The UEFI diagnostic code for this event can be found
in the logged IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the
Info Center for the appropriate user response.
806f000f-220201xx • 806f000f-220203xx
Appendix D. Integrated management module II (IMM2) error messages
451
Advertisement
Table of Contents
Troubleshooting
