Dimm Installation Instructions - IBM System x3750 M4 Type 8722 Installation And Service Manual

DIMM installation instructions

Attention: Static electricity that is released to internal server components when the
server is powered on might cause the server to stop, which might result in the loss
of data. To avoid this potential problem, always use an electrostatic-discharge wrist
strap and plug it into the electrostatic-discharge connector on the front of the
server (see "Front view" on page 16 for the location of this connector) or other
grounding system when you work inside the server with the power on.
The following illustration show the locations of the DIMM connectors on the
system board.
48
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
Table 13. Memory speeds and configurations based on ranked DIMM type and
voltage (continued)
DIMM rank,
type, and DIMM
technology capacity
Single-rank 4 GB
x4 RDIMM -
2 Gb (1600
MHz)
Dual-rank x4 8 GB
RDIMM - 2
Gb (1333
MHz)
Dual-rank x4 8 GB
RDIMM - 2
Gb (1600
MHz)
Quad-rank x4 16 GB
LRDIMM - 2
Gb (1333
MHz)
Quad-rank x4 32 GB
LRDIMM - 4
Gb (1333
MHz)
1 DIMM per 2 DIMMs per
channel channel
1600
1333 1333 1333
1600
1333 1333 1333
1333 1333 1333
3 DIMMs per
channel
1600 1066
1333 1066 1333
1600 1333
1333 1333 1333
1333 1333 1333