Instructions For Ibm Business Partners; How To Send Dsa Data To Ibm - IBM System x3750 M4 Type 8722 Installation And Service Manual

Instructions for IBM Business Partners

In addition to the instructions in this chapter for installing optional hardware
devices, updating firmware and device drivers, and completing the installation,
IBM Business Partners must also complete the following steps:
1. After you have confirmed that the server starts correctly and recognizes the
2. Shut down and restart the server multiple times to ensure that the server is
3. Save the DSA log as a file and send it to IBM. For information about
4. To ship the server, repackage it in the original undamaged packing material
Support information for IBM Business Partners is available at http://
www.ibm.com/partnerworld/pwhome.nsf/weblook/index_us.html.

How to send DSA data to IBM

Before you send diagnostic data to IBM, read the terms of use at
http://www.ibm.com/de/support/ecurep/terms.html.
You can use any of the following methods to send diagnostic data to IBM:
v Standard upload: http://www.ibm.com/de/support/ecurep/send_http.html
v Standard upload with the system serial number: http://www.ecurep.ibm.com/
v Secure upload: http://www.ibm.com/de/support/ecurep/
v Secure upload with the system serial number: https://www.ecurep.ibm.com/
24
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
newly installed devices and that no error LEDs are lit, run the Dynamic System
Analysis (DSA) stress test. For information about using DSA, see "IBM
Dynamic System Analysis" on page 169.
correctly configured and functions correctly with the newly installed devices.
transferring data and logs, see "How to send DSA data to IBM."
and observe IBM procedures for shipping.
app/upload_hw
send_http.html#secure
app/upload_hw