Replacing A Cd/Dvd Drive - IBM System x3750 M4 Type 8722 Installation And Service Manual

5. Slide the drive-retention clip from the side of the drive. Save the clip to use
6. If you are instructed to return the CD/DVD drive, follow all packaging

Replacing a CD/DVD drive

The following notes describe the type of drives that the server supports and other
information that you must consider when you install a CD/DVD drive. For a list
of supported drives, see http://www.ibm.com/servers/eserver/serverproven/
compat/us/.
v Locate the documentation that comes with the drive and follow those
v Make sure that you have all the cables and other equipment that are specified in
v The server supports one optional ultra-slim SATA CD-RW/DVD-ROM optical
If you need to replace a CD/DVD drive, complete the following steps:
1. Read the safety information that begins on page "Safety" on page vii and
2. Touch the static-protective package that contains the new optical drive to any
218
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
CD/DVD-ROM
drive
when you install the replacement drive.
instructions, and use any packaging materials for shipping that are supplied to
you.
instructions in addition to the instructions in this chapter.
the documentation that comes with the drive.
drive.
"Installation guidelines" on page 33.
unpainted metal surface on the server; then, remove the drive from the package
and place it on a static-protective surface.
Note: If you are installing a drive that contains a laser, observe the following
safety precaution.
Statement 3