Table of Contents
Advertisement
CLI Commands
2
2-64
McDATA OPENconnectors Command Line Interface USER MANUAL
link portNumber
This command displays port link counters for a single port.
This command has one parameter.
portNumber
Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Root> perf link 2
The port link counter data is displayed as a table that includes the
following statistics.
Port
The port number.
OLS In
The number of offline sequences initiated by the
attached N_Port.
OLS Out
The number of offline sequences initiated by
this director or switch port.
Reset In
The number of link resets initiated by the
attached N_Port.
Reset Out
The number of link resets initiated by this
director or switch.
LIPS In
The number of Loop Initialization Primitives
(LIPS) detected on this switch loop port.
LIPS Out
The number of LIPS generated on this switch
loop port.
Link Flrs
The number of times the port has detected a
link error resulting from an invalid link state
transition or timeout.
P/N 620-000134-300
Advertisement
Table of Contents
