Show.features - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

CLI Commands
2
2-68 McDATA OPENconnectors Command Line Interface USER MANUAL
The output from the show.eventLog command displays as follows.
Date/Time Code Severity
---------------- ---- --------
04/12/01 10:58A 375 Major
04/12/01 9:58A 385 Severe
04/11/01 7:18P 395 Severe
features
This command displays a table of all installed feature sets and their
states. The output is exactly the same as the output to
config.features.show.
This command has no parameters.
Root> show features
The features data is displayed as a table that includes the following
properties.
Installed Feature The feature set installed using a feature key.
Set Only installed keys are displayed.
Feature Individual features within each set. In many
cases, there is only one feature within each
feature set.
State The state of the individual feature. Fabric-wide
features are displayed as Active/Inactive.
Switch-centric features are displayed as
Enabled/Disabled.
The output from the show.features command displays as follows.
Installed Feature Set
------------------------------
Open Systems Management Server
Flex Ports
SANtegrity
SANtegrity
SANtegrity
FRU Event Data
----- -----------------------------------
CTP-0 00010203 04050607 08090A0B 0C0D0E0F
CTP-0 00010203 04050607 08090A0B 0C0D0E0F
CTP-0 00010203 04050607 08090A0B 0C0D0E0F
Feature
-----------------
OSMS
8 Flex Ports
Fabric Binding
Switch Binding
Enterprise Fabrics
P/N 620-000134-300
State
----
Enabled
Enabled
Active
Enabled
Active