Config.port.show - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

show portNumber
This command displays the port configuration for a single port.
This show command, on the config.port branch, displays the current
configuration for the specified port.
This command has one parameter.
portNumber Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Root> config port show 4
The port configuration is displayed as a table that includes the
following properties.
Port Number The port number.
Name The port name.
Blocked The blocked state. Valid values are true and
false.
Extended The extended distance configuration state. Valid
Distance values are true and false. (This field is not valid
on the Sphereon 4500.)
FAN The fabric address notification (FAN) state.
Valid values are true and false. (Sphereon 4500
only.)
CLI Commands
2
config 2-13