Table of Contents
Advertisement
The output from the show.system command displays as follows.
System Information
Name:
Description:
Director
Contact:
Location:
Date/Time:
Serial Number:
Type Number:
Model Number;
EC Level:
Firmware Version: 01.03.00 34
Beaconing:
zoning
This command shows the zoning configuration saved on the fabric.
This command has no parameters.
Root> show zoning
The zoning configuration data is displayed as a table that includes
the following properties.
Active ZoneSet
The enabled status, name, and member zones of
the zone set.
The output from the show.zoning command displays as follows.
Active Zone Set
Default Zone Enabled:
False
ZoneSet:
TheUltimateZoneSet
Zone:
TheUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
ZoneMember: Domain 2, Port 63
ZoneMember: 10:00:00:00:C9:22:9B:64
ZoneMember: 10:00:00:00:C9:22:9B:BD
Zone:
TheNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone:
TheNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
Joe's Switch
McDATA Intrepid 6064 Fibre Channel
Joe
Everywhere
04/16/2001
10:34:01AM
123456789
1
Intrepid 6064
1
Disabled
CLI Commands
2
show
2-89
Advertisement
Table of Contents
