Show.security.portbinding - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

CLI Commands
2
2-84 McDATA OPENconnectors Command Line Interface USER MANUAL
portBinding
This command shows the port binding configuration for all ports.
This command has no parameters.
Root> show security portBinding
The port binding configuration data is displayed as a table that
includes the following properties.
Port The port number.
WWN Binding The state of port binding for the specified port
(active or inactive).
Bound WWN The WWN of the device that is bound to the
specified port. If this field is blank, no device is
bound to the specified port.
The output from the show.security.portBinding command displays as
follows.
Port WWN Binding
---- -----------
0 Active
1 Inactive
2 Inactive
3 Active
4 Inactive
5 Inactive
6 Inactive
7 Inactive
8 Inactive
9 Inactive
10 Inactive
11 Inactive
12 Inactive
13 Inactive
14 Inactive
15 Inactive
Bound WWN
-----------------------
AA:00:AA:00:AA:00:AA:00
00:00:00:00:00:00:00:00
CC:33:44:55:CC:33:44:55
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
00:00:00:00:00:00:00:00
P/N 620-000134-300