Show.security.fabricbinding - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

fabricBinding
This command displays the fabric binding configuration saved on the
fabric. The command performs the same function as
config.security.fabricBinding.showActive.
This command has no parameters.
Root> show security fabricBinding
The fabric binding configuration data is displayed as a table that
includes the following properties.
Fabric Binding The active fabric binding state: Inactive or Active
State Restricting
Fabric The active fabric membership list.
Membership List
The output from the show.security.fabricBinding command displays
as follows.
Fabric Binding State:
Domain 1 (00:11:22:33:44:55:66:77)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF)
Domain 14 (11:55:35:45:24:78:98:FA)
Active Restricting
CLI Commands
2
show 2-83