Config.switch; Config.switch.bbcredit; Config.switch.domainrscn - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

CLI Commands
2
2-32 McDATA OPENconnectors Command Line Interface USER MANUAL
Some of the config.switch commands require that the switch be set
offline. (Use the maint.system.setOnlineState to set the switch
offline.) If these commands are entered while the switch is online, an
error message results.
bbCredit bbCreditValue
This command sets the buffer-to-buffer credit value for all ports,
except those ports configured for extended distance. (The Sphereon
4500 does not accept this command.)
The switch must be set offline before this command is entered.
This command has one parameter.
bbCreditValue Specifies the new buffer-to-buffer credit value.
This parameter must be an integer in the range
1–60.
Root> config switch bbCredit 2
domainRSCN domainRSCNState
This command sets the domain RSCN state for the switch. The switch
can be either offline or online when this command is executed.
This command has one parameter.
domainRSCNState Specifies whether the domain RSCN state is
enabled. Valid values are enable and disable.
Boolean 1 and 0 may be substituted as values.
Root> config switch domainRSCN 1
P/N 620-000134-300