Config.features.enterprisefabmode; Config.features.ficonms - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

enterpriseFabMode enterpriseFabModeState
This command sets the Enterprise Fabric Mode state for the fabric.
The McDATA SANtegrity™ feature key must be installed to activate
the Enterprise Fabric Mode state.
This command has one parameter.
enterpriseFabModeState
Root> config features enterpriseFabMode 1
ficonms ficonmsState
This command sets the enabled state of the FICON Management
Server. The FICON Management Server feature key must be installed
in order to enable the FICON Management Server State. (The
Sphereon 4500 does not accept this command.)
This command has one parameter.
ficonmsState Specifies whether the FICON Management
Server is enabled. Valid values are enable and
disable. Boolean 1 and 0 may be substituted as
values.
Root> config features ficonms 1
Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.
CLI Commands
2
config 2-3