Table of Contents
Advertisement
Who Should Use This
Manual
P/N 620-000134-500
This publication is part of the documentation suite that supports the
McDATA® Sphereon™ 3016 Fabric Switch, Sphereon 3032 Fabric
Switch, Sphereon 3216 Fabric Switch, Sphereon 3232 Fabric Switch,
Sphereon 4500 Fabric Switch, Intrepid™ 6064 Director, and Intrepid
6140 Director.
This publication describes the commands that can be entered through
the Command Line Interface for the Intrepid 6064 Director, Intrepid
6140 Director, Sphereon 4500 Switch, Sphereon 3016 Switch,
Sphereon 3032 Switch, Sphereon 3216 Switch, and the Sphereon 3232
Switch. (A limited number of these commands are available on the
ED-5000 Director.) Access through a Telnet client is presumed.
This publication is intended for data center administrators and
customer support personnel, who can either enter the commands
manually or write a script containing them. However, the primary
purpose of the Command Line Interface is for scripts written by these
administrators and personnel for use in a host-based scripting
environment. Therefore, this publication presumes that the user is
familiar with:
•
Establishing and using a Telnet session
•
Using the command line of a terminal
•
Writing scripts
•
Networking, SAN, and zoning concepts
McDATA OPENconnectors Command Line Interface USER MANUAL
ix
Advertisement
Table of Contents
