Table of Contents
Advertisement
CLI Commands
2
2-88
McDATA OPENconnectors Command Line Interface USER MANUAL
system
This command displays a set of system attributes.
This command has no parameters.
Root> show system
The system attributes are displayed as a table that includes the
following properties.
Name
The system name as set in the
config.system.name command.
Description
The system description as set in the
config.system.description command.
Contact
The system contact as set in the
config.system.contact command.
Location
The system description as set in the
config.system.description command.
Date/Time
The system date and time as set in the
config.system.date command.
Serial Number
The serial number for the system.
Type Number
The type number for the system.
Model Number
The model number for the system (for example,
Intrepid 6064).
EC Level
The engineering change level installed.
Firmware
The current firmware version installed.
Version
Beaconing
The enabled state of unit beaconing (enabled or
disabled) as set in the maint.system.beacon
command.
P/N 620-000134-300
Advertisement
Table of Contents
