CLI Commands
2
config.security.fabricBinding.showActive
2-18
McDATA OPENconnectors Command Line Interface USER MANUAL
showActive
This command displays the fabric binding configuration saved on the
fabric. It performs the same function as show.security.fabricBinding.
This command has no parameters.
This command displays the following fabric binding configuration
data:
Fabric Binding
The active fabric binding state: Inactive or
State
Active Restricting
Fabric
The active fabric membership list.
Membership List
The output from the config.security.fabricBinding.showActive
command displays as follows.
Fabric Binding State:
Domain 1
(00:11:22:33:44:55:66:77
Domain 2
(88:99:AA:BB:CC:DD:EE:FF)
Domain 14 (11:55:35:45:24:78:98:FA)
Active Restricting
P/N 620-000134-300