Table of Contents
Advertisement
Message
Error 79: FRU Failed
Description
The specified FRU has failed.
Action
Consult the installation/service manual for appropriate action.
Message
Error 81: Default Zone Enabled
Description
The request cannot be completed because the default zone is enabled
Action
Disable the default zone and re-submit the command.
Message
Error 82: Invalid Interop Mode
Description
The value entered for the interoperability mode is not valid.
Action
The interoperability mode for the director or switch must be mcdata
(McDATA Fabric 1.0) or open (Open Fabric 1.0). Make the
appropriate changes and re-submit the command.
Message
Error 83: Not Allowed in Open Fabric Mode
Description
This request cannot be completed while this switch is operating in
Open Fabric 1.0 mode.
Action
Configure the interop mode to McDATA Fabric 1.0 mode.
Message
Error 88: Invalid Feature Key Length
Description
The feature key installed is longer than the maximum length allowed.
Action
Be sure that the key has been entered correctly and re-submit. Contact
your sales representative with any further problems.
Error Messages
A
Error Messages
A-11
Advertisement
Table of Contents
