Table of Contents
Advertisement
CLI Commands
2
2-36
McDATA OPENconnectors Command Line Interface USER MANUAL
raTOV timeoutValue
This command sets the R_A_TOV for the switch.
The switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its
relationship with E_D_TOV.
This command has one parameter.
timeoutValue
Specifies the new R_A_TOV value. The units for
this value are tenths of a second. This parameter
must be an integer in the range 10–1200
(1 second to 120 seconds), and it must be larger
than the E_D_TOV.
Root> config switch raTOV 20
P/N 620-000134-300
Advertisement
Table of Contents
