Using The Commadelim Command; Commadelim - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

Root> show eventLog
Date/Time,Code,Severity,FRU,Event Data,
04/12/01 10:58A,375,Major,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
04/12/01 10:58A,375,Major,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
04/12/01 9:58A,385,Severe,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
04/11/01 7:18P,395,Severe,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
Note that the output examples shown in the other sections of this
publication presume that commaDelim is off.
commaDelim enable
This command enables the user to obtain displayed information in
comma-delimited, rather than tabular, format. Tabular format is the
default.
This command can be entered at any point in the command tree.
This command has one parameter
enable Specifies the comma-delineated state for
output. Valid values are true and false. Boolean 1
and 0 may be substituted as values.
Root> commaDelim true
Config> commaDelim 1
Config.Port> commaDelim false
Output displayed in commaDelim mode is as follows:

Using the commaDelim Command

Introduction
1
1-13