CLI Commands
2
2-52
McDATA OPENconnectors Command Line Interface USER MANUAL
renameZone "oldZoneName" "newZoneName"
This command renames a zone in the work area.
This command has two parameters.
oldZoneName
Specifies the current zone name of the zone to
be renamed.
newZoneName
Specifies the new zone name. The
newZoneName must contain 1–64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdef
ghijklmnopqrstuvwxyz0123456789$-^_
Spaces are not permitted, and the first character
must be alphabetical.
Root> config zoning renameZone TheOldUltimateZone
TheUltimateZone
P/N 620-000134-300