show
This command shows the switch configuration.
This command has no parameters.
The switch can be either offline or online when this command is
executed.
Root> config switch show
The switch configuration data is displayed as a table that includes the
following properties.
BB Credit
The maximum number of outstanding frames
that can be transmitted without causing a buffer
overrun condition at the receiver. (This is not
valid for the Sphereon 4500.)
R_A_TOV
Resource Allocation Time Out Value.
This value is set in tenths of a second.
E_D_TOV
Error Detect Time Out Value.
This value is set in tenths of a second.
Preferred
The preferred domain ID of the switch.
Domain Id
Switch Priority
The switch priority. Values are Principal,
Default, or Never Principal.
Speed
The switch speed. (This is not valid for the
Sphereon 4500.)
Rerouting Delay
The rerouting delay that ensures that frames are
delivered in order through the fabric to their
destination. Values are Enabled or Disabled.
Interop Mode
Interoperability mode for the switch.
CLI Commands
2
config
2-39