Show.security.switchbinding - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

switchBinding
This command displays the switch binding configuration.
This command has no parameters.
Root> show security switchBinding
The switch binding configuration data is displayed as a table that
includes the following properties.
Switch Binding Disabled, Enabled and Restricting F_Ports,
State
Enabled and Restricting E_Ports, or
Enabled and Restricting All Ports
Switch The active switch membership list.
Membership List
The output from the show.security.switchBinding command displays
as follows.
Switch Binding State:
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
Enabled and Restricting E Ports
CLI Commands
2
show 2-85