McDATA OPENconnectors Command Line Interace Command Line Interface Manual page 126

Error Messages
A
A-4 McDATA OPENconnectors Command Line Interface USER MANUAL
Message Error 20: Invalid Preferred Domain ID
Description The value entered for the preferred domain ID for the director or
switch is invalid.
Action The preferred domain ID must be an integer in the range 1–31. Enter
an appropriate value and re-submit.
Message Error 21: Invalid Switch Priority
Description The value entered for the switch priority is invalid.
Action The switch priority entered for the director or switch must be one of
the following: principal, neverprincipal, or default. Enter an appropriate
value and re-submit. (Refer to the description of the command in
config.switch.priority
Message Error 29: Invalid Gateway Address
Description The value entered for the gateway address is invalid.
Action The new gateway address for the Ethernet interface must be entered
in dotted decimal format (e.g. 0.0.0.0). Enter an appropriate gateway
address and re-submit.
Message Error 30: Invalid IP Address
Description The value entered for the IP Address is invalid.
Action The new IP address for the Ethernet interface must be entered in
dotted decimal format (e.g. 10.0.0.0). Enter an appropriate IP address
and re-submit.
on page 2-35.)
P/N 620-000134-500