Config.security.userrights - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

CLI Commands
2
config.security.userRights.administrator
2-26 McDATA OPENconnectors Command Line Interface USER MANUAL
administrator "username" "password"
This command sets the name and password for administrator-level
access.
Immediately after the name and password for the administrator is
set, you are prompted to log in with the new access rights.
This command has two parameters.
username Specifies the new user name for
administrator-level login. Default is set to
Administrator. This parameter is 1–15 characters.
Valid characters include all characters in the
USASCII character set, excluding control
characters and spaces. Spaces are not valid even
though quotation marks are used.
password Specifies the password for administrator-level
login. Default is set to password. This parameter
is 1–15 characters. Valid characters include all
characters in the USASCII character set,
excluding control characters and spaces. Spaces
are not valid even though quotation marks are
used.
Root> config security userRights administrator
"Administrator" "newpassword"
P/N 620-000134-300