Table of Contents
Advertisement
frus
This command displays information about all FRUs.
This command has no parameters.
Root> show frus
The FRU information is displayed as a table that includes the
following properties.
FRU
The FRU name.
• If a FRU is not installed on a Sphereon 3016,
3216, 3032, 3232, or an Intrepid 6064, the
output in this column is NotInstalled.
• If a FRU is not installed on a Sphereon 4500
or an Intrepid 6140, the output in this column
is the name of the missing FRU or Unknown.
Position
The relative position of the FRU, that is, its slot.
State
The state of the FRU. Values are:
Active—the current module is active.
Backup—this module is not currently being
used, but it is available for immediate failover.
NotInst—the module is not currently installed.
Failed—the current module is failed.
Serial Num
The serial number of the FRU. (This field is
blank for power supply modules of the
Sphereon 4500.)
Part Num
The part number of the FRU.
Beacon
The beaconing state of the FRU (On or Off).
Pwr On Hrs
The power-on hours value for the FRU.
CLI Commands
2
show
2-69
Advertisement
Table of Contents
