Table of Contents
Advertisement
CLI Commands
2
2-74
McDATA OPENconnectors Command Line Interface USER MANUAL
The device information data is displayed as a table that includes the
following properties.
Type
The type (N, NL, F/NL, F, FL, E, B).
Port Id
The 24-bit Fibre Channel address.
Port Name
The port WWN of the attached device.
Node Name
The node WWN of the attached device.
COS
The class of service (for example, 1; 2; 3; 4; 5; 6;
F; 1,2; 2,3).
FC4 Types
The FC4 types registered for this device. One or
more numbers display in this field. The
numbers in this field correspond to the list in
the output example for
page 2-72.
SymNodeName
255-character representation of the Symbolic
Node Name.
SymPortName
255-character representation of the Symbolic
Port Name.
The output from the show.nameServerExt command displays as
follows.
Type, Port Id, Port Name, Node Name, COS, FC4 Types,
SymNodeName, SymPortName,
N,
010400, 00:11:22:33:44:55:00:77,
20:11:22:33:44:55:66:77, 2-3, 2, Node Name A, Port
Name A,
N,
010500, 00:11:22:33:44:55:01:77,
20:11:22:33:44:55:66:77, 2-3, 0, This Is Symbolic Node
Name B, Symbolic Port Name B Is Slightly Longer
N, 010600, 00:11:22:33:44:55:66:02,
20:11:22:33:44:55:66:77, 2-3, 2, , ,
FL, 000001, 00:11:22:33:44:55:66:03,
20:11:22:33:44:55:66:77, 2, 0, Loop Node 1, Loop Port
7
FL, 000002, 00:11:22:33:44:55:66:04
20:11:22:33:44:55:66:77, 3, 2, Loop Node 2, Loop Port
7,
show.nameServer
on
P/N 620-000134-300
Advertisement
Table of Contents
