Config.zoning.showactive - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

CLI Commands
2
2-54 McDATA OPENconnectors Command Line Interface USER MANUAL
showActive
This command shows the zoning configuration saved on the fabric.
This command has no parameters.
Root> config zoning showActive
The zoning configuration data is displayed as a table that includes
the following properties.
Active ZoneSet The enabled status, name, and member zones of
the zone set.
The output from the config.zoning.showActive command displays as
follows.
Active Zone Set
Default Zone Enabled:
ZoneSet: TheUltimateZoneSet
Zone: TheUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
ZoneMember: Domain 2, Port 63
ZoneMember: 10:00:00:00:C9:22:9B:64
ZoneMember: 10:00:00:00:C9:22:9B:BD
Zone: TheNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
False
P/N 620-000134-300