Config.system.contact - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

CLI Commands
2
2-40 McDATA OPENconnectors Command Line Interface USER MANUAL
Insistent Domain When enabled, ensures that the embedded
Id firmware cannot change a switch's preferred
domain ID.
Domain RSCN When enabled, allows domain RSCNs to be sent
to registered members of the fabric.
The output from the config.switch.show command displays as
follows.
BB Credit:
R_A_TOV:
E_D_TOV:
Preferred Domain Id: 1
Switch Priority:
Speed:
Rerouting Delay:
Interop Mode:
Insistent Domain Id: Disabled
Domain RSCN:
contact "systemContact"
This command sets the system contact attribute.
This command has one parameter.
systemContact Specifies the new system contact string for the
director or switch. The contact can contain
0–255 characters.
Root> config system contact "Joe"
2
20
4
Principal
2 Gb/sec
Enabled
Open Fabric 1.0
Enabled
P/N 620-000134-300