McDATA OPENconnectors Command Line Interace Command Line Interface Manual page 129

Message Error 42: Invalid Second
Description The value of the second entered for the new system time is invalid.
Action The format of the time parameter must be hh:mm:ss. The second can
contain an integer in the range 0–59. Enter an appropriate time and
re-submit.
Message Error 44: Max SNMP Communities Defined
Description A new SNMP community may not be defined without removing an
existing community from the list.
Action A total of 6 communities may be defined for SNMP. A new
community can be added only after a current community is removed.
Make the appropriate changes and re-submit.
Message Error 45: Not Allowed While Switch Online
Description The entered command requires that the director or switch be set
offline.
Action Set the switch offline and re-submit the command.
Message Error 55: Invalid Zone Name
Description The value entered for the zone name is invalid.
Action The zone name must be unique and contain 1–64 characters. The
valid character set for the zone name can be found under
config.zoning.addZone
the zone name and re-submit.
on page 2-47. Make the appropriate changes to
Error Messages
A
Error Messages A-7