Config.system.location; Config.system.name - McDATA OPENconnectors Command Line Interace Command Line Interface Manual

CLI Commands
2
2-42 McDATA OPENconnectors Command Line Interface USER MANUAL
location "systemLocation"
This command sets the system location attribute.
This command has one parameter.
systemLocation Specifies the new system location for the
director or switch. The location can contain
0–255 characters.
Root> config system location "Everywhere"
name "systemName"
This command sets the system name attribute.
This command has one required parameter.
systemName Specifies the new system name for the director
or switch. The name can contain 0–24
characters.
Root> config system name "Joe's Switch"
P/N 620-000134-300