Efa Transfer Sequence; Efa Transfer Reconnect Sequence On Busy - Panasonic KX-TVA50 Programming Manual

2.5.4 Parameters
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes
Feature Manual References
2.2.7 Call Transfer to Outside

EFA Transfer Sequence

Specifies the sequence the VPS uses to transfer calls to trunks (CO lines) using EFA (External Feature
Access). This setting should match the settings of the PBX.
Default
F 60TN
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes

EFA Transfer Reconnect Sequence on Busy

Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (External
Feature Access) is busy. This setting should match the settings of the PBX.
Default
F 60TN
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes
178 Programming Manual
, # and special codes
, # and special codes
, # and special codes
Document Version 3.0 2010/06