Integration Mode; Maximum Extension Number Length - Panasonic KX-TVA50 Programming Manual

2.5.4 Parameters
Value Range
KX-TDA/TAW/TDE, KX-TD1232/TD816/TA1232, KX-TD308, KX-TD500, KX-TA624/824, Other PBX
*1 The value range varies depending upon country/area and the VPS model (KX-TVA50/KX-TVA200). Consult your dealer for more
details.

Integration Mode

Specifies the method of integrating the VPS with the PBX.
Note that DPT Integration is the only available integration mode for KX-TVA200.
Default
DPT
Value Range
Inband: The PBX sends DTMF signals to the VPS to indicate the status of calls (busy, answered, disconnect,
etc.). The DTMF code for each status must be set in the Inband Signaling Parameters; the settings of the PBX
and VPS must match. If the PBX type is set to a KX-T series PBX, the Inband Signaling Parameters will
automatically default to the proper codes. This is available with any of the following Panasonic KX-T series
PBXs: KX-TDA/TAW/TDE, KX-TD816, KX-TD1232/TA1232, KX-TA624, KX-TA824, KX-TD500, and
KX-TD308.
DPT: The VPS communicates with the PBX via the DPT interface. This is available with any of the following
Panasonic KX-T series PBXs: KX-TDA/TAW/TDE, KX-TD816, KX-TD1232/TA1232, KX-TD500, and
KX-TD308.
APT: The VPS communicates with the PBX via the APT Interface. This is available with any of the following
Panasonic KX-T series PBXs: KX-TA624 and KX-TA824.
Feature Manual References
APT Integration (KX-TVA50 only)
DPT Integration
Inband Integration (KX-TVA50 only)

Maximum Extension Number Length

Set this parameter to match the maximum number of digits which the connected PBX recognizes as an
extension number.
Default
3
Value Range
2–8 digits
Extension Number of VPS Port
Specifies the PBX extension number of the port connected to the VPS. When configuring the VPS via the Auto
Configuration feature, this parameter is set automatically.
Default
None
152 Programming Manual
*1
Document Version 3.0 2010/06