2.1.11 E-mail Option
2.1.11 E-mail Option
Enables subscribers to receive notification by e-mail when they receive new messages.
Follow the steps below to edit e-mail parameters.
1.
Click Add Mailbox... or select a mailbox and click Edit Mailbox....
2.
Enter the username for the subscriber's e-mail account next to Username.
3.
Enter the subscriber's e-mail address next to E-mail Address. Up to 3 addresses can be set by inserting
a comma between each address.
Example: address1@___.com,address2@___.com,address3@___.com
4.
Set Send E-mail with New Messages to Enable to allow the subscriber to receive e-mail notifications.
5.
Set Attach Voice File to Enable to allow the subscriber to receive voice messages as e-mail file
attachments.
6.
Click Click to edit... next to E-mail Schedule to determine when e-mail messages are sent, and make
the appropriate settings.
7.
Click OK when finished.
Username
Specifies a subscriber's username for e-mail option.
Default
None
Value Range
Max. 64 characters
76
Programming Manual
Document Version 3.0 2010/06