Call Transfer Anytime - Panasonic KX-TVA50 Programming Manual

2.4.4 Custom Service
Default
Primary
Value Range
None, Primary, Guidance No. (KX-TVA50: No. 1-3, KX-TVA200: No. 1-10)
Programming Manual References
"Incoming Call Service Prompt" in 2.3.1.1 Call Service
Feature Manual References
2.2.16 Custom Service
Menu Repeat Cycle
Specifies the number of times the Custom Service menu message will be repeated for the caller.
Default
3
Value Range
1–3 times
Feature Manual References
2.2.16 Custom Service

Call Transfer Anytime

Specifies the type of dialing that the VPS accepts during the Custom Service in addition to the single-digit
Custom Service options. This setting allows callers to dial numbers to connect themselves to an extension or
mailbox or enter a PIN.
Note
•
If you only need to allow callers to dial single-digit Custom Service option numbers, set this parameter
to "No". When set to a value other than "No", the VPS always waits for the amount determined by the
"Wait for Second Digit" setting before handling the call. This will cause a delay between the time the
caller dials a single-digit Custom Service option number and when the call is actually handled.
Default
Extn
Value Range
Extn: enables callers to be transferred directly to their intended party by dialing the extension number.
Mbx: enables callers to leave messages in a mailbox by entering the mailbox number.
PIN: enables callers to be transferred directly to the specified party according to the setting for PIN Call Routing
Service by dialing PIN.
No: disables extension transfer and mailbox transfer; only 1-digit entries will function (following the Custom
Service menu)
124 Programming Manual Document Version 3.0 2010/06