Panasonic KX-TVA50 Programming Manual page 125

Feature Manual References
2.2.16 Custom Service
Wait for First Digit
Specifies the length of time that the VPS waits for the caller to dial the first digit after a Custom Service menu
is played for the caller. If this time expires, the No DTMF Operation settings determines how the call is then
handled. If this parameter is set to "0", No DTMF Input Operation handles the call immediately after the menu
is played for the caller.
Default
6 s
Value Range
0 s–10 s
Feature Manual References
2.2.16 Custom Service
Wait for Second Digit
This parameter is only valid when "Call Transfer Anytime" is set to a value other than "No". After the caller dials
a digit (the first digit) after listening to a Custom Service menu, the VPS waits for a second digit to be dialed.
This gives the caller time to continue dialing a mailbox number, extension number, or PIN. If this time expires
without a second digit being entered, the VPS assumes the caller has selected a Custom Service menu option
and handles the call according to the digit dialed by the caller.
Default
1 s
Value Range
1 s–5 s
Feature Manual References
2.2.16 Custom Service
No DTMF Input Operation
Determines how calls are handled when callers do not dial any numbers after listening to the menu message
(most likely because they are using rotary telephones) The default setting is "Operator", which allows the caller
to be automatically connected to an operator after the menu message plays back ("Press the desired number,
or stay on the line to be connected to an operator.").
Default
Operator
Value Range
Trf to Mbx: Allows the caller to leave messages in a specified mailbox.
Trf to Extn: Transfers the caller to a specified extension.
Operator: Connects the caller to an operator.
Document Version 3.0 2010/06
2.4.4 Custom Service
Programming Manual 125