Twt (Two-Way Transfer) Into Mailbox; Twt (Two-Way Transfer) Button Assignment - Panasonic KX-TVP50E Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
6.
Exit the program mode:
For KX-TA series
Set the MEMORY switch to "SET".
For KX-TD series
Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
Conditions:

4.4.11 TWT (Two-Way Transfer) into Mailbox

This feature allows an extension users to record a conversation into another person's mailbox
by pressing the Two-Way Transfer (TWT) button followed by the mailbox number. This is
commonly used by a person who is taking a detailed message for someone else and wants the
message recorded in the mailbox at the same time.

4.4.12 TWT (Two-Way Transfer) Button Assignment

For the Two-Way Transfer feature to work at an extension, the extension must have a TWT
button on it. This button must be either a DSS/BLF or line key (must have a lamp). Follow the
procedure below to assign a TWT button on an extension. (This is an extension level program
and should be done at each individual phone.)
1.
Enter Station Programming:
For KX-TA series
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-TD series
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the desired Flexible (Line or DSS/BLF) key that you want to assign as the TWT
button.
3.
Press [91] (for KX-TA series) or [84] (for KX-TD series).
Screen output: 2WAY-TRANS:
4.
Enter a Voice Mail extension number.
Screen output: 2WAY-TRANS: _ _ _
(_ _ _ = The extension number you entered).
5.
Press STORE.
6.
Exit the program mode:
For KX-TA series
Set the MEMORY switch to "SET".
72
This button must be a CO or DSS/BLF button to be
programmed as a TWR button. When all Voice Mail
ports are busy and this key is pressed, the user will hear
reorder tone.
Installation Manual