Obtain An Ip Address Automatically; Use The Following Ip Address - Panasonic KX-TVA50 Programming Manual

1.9.13 Utility—LAN Settings
Follow the steps below for LAN Settings:
1.
Click Utility in the menu bar.
2.
Select LAN Settings.
3.
Edit parameters in the LAN Settings dialog box.
4.
To change the port number, click Advanced Settings, otherwise click OK to finish.
5.
Enter the port number that will be used when connecting to the VPS via the KX-TVA Maintenance
Console, then click OK.
6.
Click OK.
Note
•
The port number setting is used for both LAN and modem connections to the VPS.
•
Consult the LAN administrator for the appropriate settings.
•
The VPS must be restarted after these settings are changed in order for them to take effect.
Automatic or manual IP address assignment
If the VPS is connected to a network with a DHCP server, you can program the VPS to receive an IP address
automatically.

Obtain an IP address automatically

Check this item to have the VPS obtain an IP address automatically from the local network's DHCP server.
Default
Not checked

Use the following IP address:

Check this item if you want to assign a specific IP address, subnet mask, and default gateway to the VPS.
Default
Checked
IP Address
Specifies the IP Address for the VPS. You can program this setting only if Use the following IP address: is
selected.
Default
192.168.1.11
Subnet Mask
Specifies the Subnet Mask for IP Address. You can program this setting only if Use the following IP
address: is selected.
Default
255.255.255.0
36 Programming Manual Document Version 3.0 2010/06