Efa Transfer Reconnect Sequence On No Answer; Call Transfer To Outside Answer Mode - Panasonic KX-TVA50 Programming Manual

EFA Transfer Reconnect Sequence on No Answer

Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (External
Feature Access) does not answer. This setting should match the settings of the PBX.
Default
F 60TN
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes

Call Transfer to Outside Answer Mode

Specifies the answering method the VPS uses to detect whether the destination party has answered the
transferred trunk (CO line) call.
Default
Guidance
Value Range
Analyze: the VPS monitors the status of the trunk (CO line), recognizes that the destination party goes off-hook,
and connects the line.
Guidance: the VPS plays the following guidance before connecting the line to the destination party: "You have
a call. To answer the call, press [1]. Otherwise, press [2] and hang up." If the destination party presses "1", he
or she will be able to answer the transferred trunk (CO line) call. The VPS continues playing this guidance for
the time specified in "Outgoing Call No Answer Time" in "Dialling Parameters". If the transferred party does
not answer the call within this time, the VPS considers it as a No Answer call.
Feature Manual References
2.2.7 Call Transfer to Outside
Ignore Received First DTMF
If the PBX sends a DTMF signal to the VPS when the VPS attempts to transfer a call to an outside telephone,
set this parameter to "Enable".
Default
Enable
Value Range
Disable, Enable
Document Version 3.0 2010/06
, # and special codes
2.5.4 Parameters
Programming Manual 179