Intercom Paging Retry; Caller Recorded Name Announcement Mode - Panasonic KX-TVA50 Programming Manual

Value Range
1–3 times
Feature Manual References
2.2.25 Intercom Paging (APT/DPT Integration Only)

Intercom Paging Retry

Specifies the number of times to retry paging when the called subscriber has set Incomplete Call Handling to
"Intercom Paging" and the subscriber is busy or if there is no answer.
Note
•
This setting applies only when the subscriber has set Incomplete Call Handling to "Intercom Paging".
Default
2
Value Range
1–10 times
Feature Manual References
2.2.25 Intercom Paging (APT/DPT Integration Only)

Caller Recorded Name Announcement Mode

Determines whether or not the VPS announces the caller's name during paging. (In order for the name to be
announced, it must be recorded beforehand.)
Default
Disable
Value Range
Disable, Enable
Feature Manual References
2.2.25 Intercom Paging (APT/DPT Integration Only)
Paging Code
Specifies the intercom paging code. The settings made here must match the settings of the PBX.
Note
•
Each subscriber's Intercom Paging Group Number is determined based on his or her COS.
Default
All groups: None
Paging Code for Group 1-32:
Document Version 3.0 2010/06
33 + Group No.
2.5.4 Parameters
Programming Manual 171