Password For Message Manager - Panasonic KX-TVA50 Programming Manual

2.8.1 Administrator
Note
•
The System Administrator will be asked to set the Message Manager's password if both of the following
conditions are met:
a.
The System Administrator changes this parameter from "Disable" to "Enable".
b.
The Message Manager's password has not been set previously.
•
The password must be entered twice for verification.
Default
Disable
Value Range
Disable, Enable
Feature Manual References
2.4.9 System Security

Password for Message Manager

If "Enable" is selected in "Message Manager Access from Telephone", assign here a password for the Message
Manager to login the VPS. A combination of numbers can be used.
Follow the steps below to change the password.
1.
Click Click to change password....
2.
Enter a new password in Enter new password:.
3.
Enter the new password in Confirm new password:.
4.
Click OK.
Default
None
Value Range
Max. 16 digits
Feature Manual References
2.4.9 System Security
210 Programming Manual Document Version 3.0 2010/06