Two-Way Transfer Button - Panasonic KX-TD816/1232AL User Manual Addendum

2.2
4
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You cannot enter a non-existent extension or a floating number.*
• A voice mail extension number must be assigned in program [127].
Programming References
• System Programming — Installation Manual Addendum
[127] Voice Mail Extension Number Assignment
* A floating Number (FN) is a virtual extension number for a resource to make it appear to be an extension.
Refer to the Installation Manual.

Two-Way Transfer Button

Allows you to assign a Flexible (CO, DSS) button as the Two-Way Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
8
3
VM extension number
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System
(one that supports digital proprietary telephone integration; e.g. KX-TVP100).
Programming
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
(Assignment)
1. Press the desired Flexible (CO, DSS) button which you wish to
assign as the Two-Way Transfer button.
2. Dial 84.
• The display shows:
4
3. Enter the extension number of the Voice Mail system.
• The display shows:
• To erase the entry, press the CLR (S2) button or the TRANSFER
†
2 WAY-TRANS:
CLR
2 WAY-TRANS:xxxx
CLR
(CLEAR) button.
(The TRANSFER (CLEAR) button becomes the CLEAR button when using the
overlay.)
(— xxxx: VM extension number)
41