Operator Service No. 1, 2, And 3; Operator's Extension - Panasonic KX-TVA50 Programming Manual

Note
•
Because the extension number assigned for Operator Service No. 1 in the Day Mode is for the Message
Manager, you cannot assign this extension to any other mailbox.
•
Extensions assigned as operators can be called by dialing [0], however, when setting features such
as Message Waiting Notification and Remote Call Forwarding, the extension number (not "0") must be
specified.
Default
Enable (checked)
Value Range
Disable (unchecked), Enable (checked)
Feature Manual References
2.2.37 Operator Service

2.4.3.2 Operator Service No. 1, 2, and 3

Operator's Extension

Specifies the extension number for Operator 1, 2, and 3.
Note
•
The default extension number of Operator 1 in day mode cannot be used with the Message Waiting
Notification Lamp feature.
•
Because the extension number assigned as Day Mode Operator 1 is automatically designated as the
Message Manager, do not assign this extension number to a mailbox. This extension number is
automatically assigned to mailbox number 998.
Default
0 for Operator 1, None for Operator 2 and Operator 3
Value Range
1–5 digits
Feature Manual References
2.2.37 Operator Service
Operator's Mailbox No.
Specifies the mailbox number for Operator 1, 2, and 3. Callers to Operator 1, 2, or 3 are prompted to leave a
message in this mailbox depending upon how the Busy Coverage or No Answer Coverage modes are set.
Default
998 for Operator 1, None for Operator 2 and Operator 3
Value Range
2–5 digits
Document Version 3.0 2010/06
2.4.3 Parameters
Programming Manual 109