Device Notification Timer; Use Mode - Panasonic KX-TVA50 Programming Manual

Use Mode

Specifies if and how each device is used for message notification. The subscriber can also specify the use
mode from his or her telephone.
Default
Continuously
Value Range
Not Use: The selected device is not used for message notification.
Continuously: The device is called whenever a message is recorded in the mailbox. If "Notification Type" is
set to "Only Urgent Messages", the device is called whenever an urgent message is recorded in the mailbox.
Scheduled: The selected device is called only during the selected times.
Feature Manual References
2.2.32 Message Waiting Notification—Device
Time Frame 1, 2 (SUN–SAT)
Specifies the schedule (time frame) of Message Waiting Notification by the selected device for each day of the
week when "Scheduled" is set in "Use Mode". Notification will be sent for messages received during the time
frame set here. For messages received during times outside of the time frame, notification will be sent at the
beginning of the next time frame.
Follow the steps below to edit the time frame.
1.
Click a day (Sunday – Saturday) tab.
2.
Click Time Frame 1 or Time Frame 2.
3.
Enter the start and end times in the "Start At:" and "End At:" fields, or drag the edges of the time frame to
mark the start and end times.
To copy the schedule of one day to another day
1.
Select a time frame in the desired "copy from" day.
2.
Click Copy.
3.
Select a time frame in the desired "copy to" day.
4.
Click Paste.
4.
Click OK.
Default
Time Frame 1: 02:00-11:00
Time Frame 2: 13:00-22:00
Value Range
00:00–24:00
Feature Manual References
2.2.32 Message Waiting Notification—Device

2.1.4.2 Device Notification Timer

Specifies the delay time for Message Waiting Notification per device.
Document Version 3.0 2010/06
2.1.4 Notification Parameters
Programming Manual 59