Incoming Call Service Prompt; Prompt For Rotary Callers - Panasonic KX-TVA50 Programming Manual

Incoming Call Service Prompt

Specifies the language of system prompts used by this call service. If set to "Primary", the default language
which is selected from all installed languages will be used. When set to "Selective", the caller can select the
language of his or her choice, provided the System Administrator or the Message Manager has recorded the
Multilingual Selection Menu. To specify Prompt Selection Number, see 2.5.4.2 Prompt Setting.
Note
•
If "Selective" is specified, you will need to select a prompt available for rotary callers. See "Prompt for
Rotary Callers" below.
Default
Primary
Value Range
Primary, Selective, Guidance No. (KX-TVA50: No. 1-3, KX-TVA200: 1-10)
Programming Manual References
2.5.4.2 Prompt Setting
Feature Manual References
2.2.45 System Prompts

Prompt for Rotary Callers

Specifies which language a rotary caller or an External Delivery Message receiver hears when he or she cannot
enter any digits to select a language after the Multilingual Selection Menu has been played. If set to
"Primary", the default language which is selected from all installed languages will be used.
Note
•
"Prompt for Rotary Callers" is only available when "Incoming Call Service Prompt" is set to
"Selective".
Default
Primary
Value Range
Primary, Selective, Guidance No. (KX-TVA50: No. 1-3, KX-TVA200: No. 1-10)
Feature Manual References
2.2.45 System Prompts
Delayed Answer Time
Specifies whether the VPS answers calls on the port or trunk (CO line) immediately (0) or after a delay (1 s
– 60 s).
Default
0 s
Document Version 3.0 2010/06
2.3.1 Service Group
Programming Manual 95